Metal–Organic Framework (MOF)-Derived Carbon-Mediated Interfacial Reaction for the Synthesis of CeO2−MnO2 Catalysts

CeO₂-based catalysts are widely studied in catalysis fields. Developing one novel synthetic approach to increase the intimate contact between CeO₂ and secondary species is of particular importance for enhancing catalytic activities. Herein, an interfacial reaction between metal–organic framework (MOF)-derived carbon and KMnO₄ to synthesize CeO₂−MnO₂, in which carbon is derived from the pyrolysis of Ce-MOFs under an inert atmosphere, is described. The MOF-derived carbon is found to restrain the growth of CeO₂ crystallites under a high calcination temperature and, more importantly, intimate contact within CeO₂/C is conveyed to CeO₂/MnO₂ after the interfacial reaction; this is responsible for the high catalytic activity of CeO₂−MnO₂ towards CO oxidation.     

Enantioselective Total Synthesis of Pseudopteroxazole and Ileabethoxazole

Enantioselective total syntheses of pseudopteroxazole ( 1 ) and ileabethoxazole ( 2 ) are presented. The two original stereocenters were constructed in excellent enantioselectivity and good diastereoselectivity through Carreira's asymmetric dual catalytic allylation, which shows potential for accessing diastereoisomers at C2 and C3 of 1 and 2 . Cationic cyclizations of 13 and 24 demonstrated an effective pathway for the construction of the opposite configurations at C1 in 1 and 2 . Additionally, an approach for the introduction of methyl at C4 is a feasible solution for structural modifications at C4 in 1 and 2 .     

基于毛竹叶片理化参数的刚竹毒蛾危害检测研究

虫害检测算法研究是开展虫害快速、准确监测，制定精准森防检疫措施的重要基础。以毛竹叶片为研究尺度，基于刚竹毒蛾危害下的寄主外部形态与内部生理现象总结，选择并实测叶损量LL、相对叶绿素含量RCC、相对含水量RWC、原始光谱的733.66~898.56 nm值(ρ_{733.66~898.56})、一阶微分光谱的562.95~585.25 nm值(ρ′_{562.95~585.25})与706.18~725.41 nm值(ρ′_{706.18~725.41})等理化参数，随机划分实验组(63组)和验证组(37组)并设计5次重复实验；分别运用Fisher判别分析、BP神经网络、随机森林等三种方法建立刚竹毒蛾危害等级的检测模型，从检测精度、Kappa系数及R2等指标对模型的检测效果予以分析和比较。结果显示，Fisher判别分析、BP神经网络、随机森林的检测精度分别为69.19%，65.41%，83.78%，Kappa系数分别为0.576 9，0.532 4和0.778 8，R2分别为0.722 2，0.582 6和0.870 9，总体而言，三种方法均具备刚竹毒蛾危害的检测能力，随机森林的检测效果最优，Fisher判别分析次之，再次为BP神经网络；从分等级来看，随机森林的检测精度亦优于Fisher判别分析与BP神经网络，但3种方法对中度危害等级的检测精度均有所不足。该成果可为刚竹毒蛾危害及其他病虫害检测算法的选择提供参考，并为进一步建立冠层、遥感影像像元等尺度的虫害检测模型奠定基础。     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

Crystal structures of silicon-rich lithium silicides at high pressure

Silicon (Si) is one of the most essential elements, as it is indispensable for modern electronic technology. The standard Si structure at ambient conditions is the cubic diamond structure, and it has an indirect band gap, which prevents it from being considered as a next-generation platform for semiconductor technologies. Therefore, the search for new allotropes of silicon has attracted great attention. Herein, first principles swarm-intelligence structure searches coupled with density-functional theory were performed to explore the stable high-pressure phases of silicon-rich lithium containing compounds, LiSi_x ($x=4\text{–}8$). The LiSi₄ stoichiometry was predicted to be stable, and it was found to assume one of the following space groups, P4/mnc, Cmmm, and C2/m within the pressure range of 0 to 50 GPa. By removing the Li atoms from these compounds, three silicon allotropes were obtained that were metastable at ambient pressures. Our work illustrates how novel silicon allotropes can be predicted using the CALYPSO method.     

Effects of van der Waals force on nonlinear vibration of electromechanical integrated electrostatic harmonic actuator

An electromechanical integrated electrostatic harmonic actuator is promising for the miniaturization of electromechanical devices. As the dimensions of the actuator decrease, the effects of the van der Waals force become obvious. In this study, by considering the nonlinearity of electrostatic and van der Waals forces, nonlinear vibration equations of the flexible ring of an electrostatic harmonic actuator are deduced. Using these equations, the nonlinear free vibration and nonlinear forced response of the actuator are investigated. The effects of the van der Waals force on the nonlinear vibration of the flexible ring are analyzed. Results show that these effects of the van der Waals force are relatively obvious under some conditions and should be considered.     

FeOOH Nanocubes Anchored on Carbon Ribbons for Use in Li/O2 Batteries

A composite of FeOOH nanocubes anchored on carbon ribbons has been synthesized and used as a cathode material for Li/O₂ batteries. Fe²⁺ ion-exchanged resin serves as a precursor for both FeOOH nanocubes and carbon ribbons, which are formed simultaneously. The as-prepared FeOOH cubes are proposed to have a core–shell structure, with FeOOH as the shell and Prussian blue as the core, based on information from XPS, TEM, and EDS mapping. As a cathode material for Li/O₂ batteries, FeOOH delivers a specific capacity of 14816 mA h g⁻¹_cathode with a cycling stability of 67 cycles over 400 h. The high performance is related to the low overpotential of the oxygen reduction/evolution reaction on FeOOH. The cube structure, the supporting carbon ribbons, and the -OOH moieties all contribute to the low overpotential. The discharge product Li₂O₂ can be efficiently decomposed in the FeOOH cathode after a charging process, leading to higher cycling stability. Its high activity and stability make FeOOH a good candidate for use in non-aqueous Li/O₂ batteries.